Grade/Comparative Standard ISO/Physical Mechanical Properties (min): Bending Strength N/mm2; Hardness HRA/Use.
1. YG3x/ K01/ 1420; 92.5/ is suitable for high speed finishing of cast iron, non-ferrous metals and alloys, hardened steel alloy steels.
2, YG6 / K20 / 1900; 90.5 / suitable for cast iron, non-ferrous metals and alloys, non-metallic materials in the middle to the cutting speed of semi-finishing and finishing.
3, YG6x / K15 / 1800; 92.0 / for chilled cast iron, ductile iron, gray cast iron, heat-resistant alloy steel cutting section of high-speed finishing, semi-finishing.
4. YG6A/K10/1800; 92.0 / High-speed finish machining for medium and small cutting sections of chilled cast iron, nodular cast iron, gray cast iron and heat-resistant alloy.
5, YG8 / K30 / 2200; 90.0 / Suitable for cast iron, non-ferrous metals and alloys, non-metallic materials, low-speed rough processing.
6, YG8N / K30 / 2100; 90.5 / for cast iron, white cast iron, ductile iron and chromium nickel stainless steel alloy materials such as high-speed cutting.
7, YG15/K40/ 2500; 87.0 / suitable for oil wells, coal mining bit, geological exploration drill.
8, YG4C/1600; 89.5/ Suitable for oil wells, coal mining bits, geological exploration drills.
9, YG8C / 1800; 88.5 / suitable for oil wells, mining drill bit, cross bit, cone drill teeth, submerged drilling teeth.
10, YG11C / 2200; 87.0 / suitable for oil wells, mining drill bit, cross bit, cone drill teeth, submerged drilling teeth.
11. YW1/M10/1400; 92.0 / Medium-speed semi-finishing for steel, heat-resistant steel, high manganese steel and cast iron.
12, YW2/M20/1600; 91.0 / Suitable for heat-resistant steel, high manganese steel, stainless steel and other hard-to-process steel, low-speed roughing and semi-finishing.
13. GE1/M30/2000; 91.0 / Low-speed rough machining and watch gear wear-resistant parts for non-metallic materials.
14, GE2 / 2500; 90.0 / carbide top hammer special grades.
15, GE3/M40/ 2600; 90.0 / suitable for the manufacture of small diameter micro drills, end mills, rotary knives and so on.
16, GE4 / 2600; 88.0 / suitable for printing needles, cylinders and special-purpose tubes, rods, belts and so on.
17, GE5 / 2800; 85.0 / suitable for roll, cold punch and other impact materials.
18, YT30 P01 92.5 For carbon steel, alloy steel finishing, small cross-section of fine cars, fine boring, fine expansion and so on.
1. YG3x/ K01/ 1420; 92.5/ is suitable for high speed finishing of cast iron, non-ferrous metals and alloys, hardened steel alloy steels.
2, YG6 / K20 / 1900; 90.5 / suitable for cast iron, non-ferrous metals and alloys, non-metallic materials in the middle to the cutting speed of semi-finishing and finishing.
3, YG6x / K15 / 1800; 92.0 / for chilled cast iron, ductile iron, gray cast iron, heat-resistant alloy steel cutting section of high-speed finishing, semi-finishing.
4. YG6A/K10/1800; 92.0 / High-speed finish machining for medium and small cutting sections of chilled cast iron, nodular cast iron, gray cast iron and heat-resistant alloy.
5, YG8 / K30 / 2200; 90.0 / Suitable for cast iron, non-ferrous metals and alloys, non-metallic materials, low-speed rough processing.
6, YG8N / K30 / 2100; 90.5 / for cast iron, white cast iron, ductile iron and chromium nickel stainless steel alloy materials such as high-speed cutting.
7, YG15/K40/ 2500; 87.0 / suitable for oil wells, coal mining bit, geological exploration drill.
8, YG4C/1600; 89.5/ Suitable for oil wells, coal mining bits, geological exploration drills.
9, YG8C / 1800; 88.5 / suitable for oil wells, mining drill bit, cross bit, cone drill teeth, submerged drilling teeth.
10, YG11C / 2200; 87.0 / suitable for oil wells, mining drill bit, cross bit, cone drill teeth, submerged drilling teeth.
11. YW1/M10/1400; 92.0 / Medium-speed semi-finishing for steel, heat-resistant steel, high manganese steel and cast iron.
12, YW2/M20/1600; 91.0 / Suitable for heat-resistant steel, high manganese steel, stainless steel and other hard-to-process steel, low-speed roughing and semi-finishing.
13. GE1/M30/2000; 91.0 / Low-speed rough machining and watch gear wear-resistant parts for non-metallic materials.
14, GE2 / 2500; 90.0 / carbide top hammer special grades.
15, GE3/M40/ 2600; 90.0 / suitable for the manufacture of small diameter micro drills, end mills, rotary knives and so on.
16, GE4 / 2600; 88.0 / suitable for printing needles, cylinders and special-purpose tubes, rods, belts and so on.
17, GE5 / 2800; 85.0 / suitable for roll, cold punch and other impact materials.
18, YT30 P01 92.5 For carbon steel, alloy steel finishing, small cross-section of fine cars, fine boring, fine expansion and so on.
Pipe clamps come in many variations as the requirements for pipe fixing can range from simple anchoring in place, to more complex scenarios involving pipe movement or heavy loads. Pipe clamps, or pipe fixings, are best defined as the support mechanism for suspended pipes, whether that be horizontal overhead or vertical, adjacent to a surface. It is essential that the right pipe clamp is used to ensure the integrity of the installation.
Pipe Bracket,Concrete Segment Bracket,Longitudinal Support Of Segments,Concrete Pipe Bracket
Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com