1. The scrubber should empty and clean the recovery tank after the work is completed. The dirt that is mixed into the dirt during the cleaning process of the machine will quickly precipitate and emit an odor. Cleaning with a faucet is especially important.
2, empty the water tank. This is even more important when the machine is not working every day. Because the immobile water is prone to bacteria.
3. Clean the suction pump filter. When dirt accumulates, it weakens its ability to inhale, and it is cleaned with a faucet.
4, check whether the suction disk is clean. If necessary, clean the rubber and suction pump inlets with a faucet.
5. Check the degree of wear of the cleaning brush and the suction disc weekly. If the ground is extremely uneven, the resulting pressure will cause damage to the fitting and cause wear. Under normal circumstances, the cleaning brush needs to be replaced after 50 hours of operation. The eraser needs to be flipped or replaced after 30 working hours.
6, often check the water filter, a small amount of impurities mixed in, may cause it to clog and affect the cleaning process in the water work.
7. Always clean the suction hose connected to the suction tray; even if it is only partially blocked, it will reduce the inhalation of dirt.
8. Do not operate the machine without fully assembling the machine. Before the user operates the machine, please check the integrity of the machine.
9. In the area to be cleaned, a preliminary cleaning is performed first, mainly for some non-water-soluble large particles, such as pebbles, etc., as well as other garbage that will affect the work of the squeegee. The reason is that the squeegee should form a ground with the ground. Only the closed space can recycle the sewage, otherwise it will not work without closing. This will greatly benefit your work efficiency and protect your machine.
10, fully automatic floor cleaning machine on the dirty surface can choose not to absorb water, wash repeatedly alone, and then in a separate water; or choose a different detergent to improve the cleaning effect of the floor cleaning; due to uneven ground, sometimes cleaned If there is still water, you can raise the brush tray, activate the water-absorbing switch, and push the washing machine. Repeatedly and repeatedly in the water area.
JXHS series Junction Box advanced technology during production, stresses the details during design, implements design standard during processing, and has high consistence of product quality. It has various features such as strong damp proof, anti-corrosion and anti-electromagnetic capacities and high adjustment accuracy, and is suitable for various adverse environments. Its main advantages include:
The product uses own mold to make technologic design, the housing uses aluminum and silicon alloy and upper protrusion and lower sinking structure is used so as to ensure good sealing performance; protective grade reaches IP 68.
Main parts are imported, wiring bar is welded with precise anti-surge electronic components, which can prevent Load Cell damage caused by lightning and power grid surge voltage.
Whole device uses stainless steel grounding bolts to ensure reliable grounding during operation.
Assembly of junction box uses not-loose screws so as to avoid loss during load cell wring.
Wiring board uses combined screws for assembly, which are convenient for removal.
In order to ensure protective effect, force and diameter of tightening parts have introduction.
Electrical Junction Box,Normal Junction Box,8-Wire Normal Junction Box,Normal Analogue Junction Box
SHANDONG JINZHONG SCIENCE & TECHNOLOGY GROUP COMPANY LIMITED , https://www.chinagoldbell.com