Hebei Slitting Unit Manufacturer

Langfang Wanda Metallurgical Equipment Manufacturing Co., Ltd. is located between Beijing and Beijing. The geographical position is superior and the transportation is convenient. We all know that only a good maintenance of equipment can have a long service life, and the performance can be maintained well. Below, Wanda Metallurgical Equipment Co., Ltd. will introduce you to some knowledge about the maintenance of slitting units:
1. Check regularly during the time of equipment customization to check whether there is any damage to the equipment.
2. Before the slitter is used, oil must be added first. There are a total of 8 oil marks on the spool of the slitting machine and the winder.
3. A small amount of engine oil is added to the table no matter if it is working or not working properly. This way it can prevent the slide from moving!
4. During the period of time when the equipment is stopped, it is necessary to periodically check whether there are abnormal noises or temperature rises in each part of the slitting machine.
The above are some of the small maintenance tips for the slitting unit. We hope that we can help everyone in the process of using the slitting machine. For more information about metallurgical equipment, please visit our homepage: We will be happy to serve you.

Activated Carbon is a very small carbon particle with a large surface area, and there are even smaller holes in the carbon particle-capillary. This capillary has a strong adsorption capacity, because of the large surface area of the carbon particles, it can be in full contact with gas(impurities). When these gases(impurities) touch the capillary, they are adsorbed and act as purifiers. The study of the surface area of activated carbon is very important. The detection data of the specific surface area of activated carbon is only true and reliable by using the BET method. At present, there are many instruments in China that can only be detected by direct comparison methods. Now it is also in China. It was eliminated. At present, multi-point BET method is used for specific surface area testing at home and abroad. The specific surface area measurement standards formulated at home and abroad are based on BET test methods. See the Chinese National Standard(GB/T 19587-2004)-BET principle for the determination of the surface area of solid substances. The specific surface area detection is actually a more time-consuming task. Due to the different adsorption capabilities of samples, the testing of some samples may take a whole day. If the test process is not fully automated, the testers can not leave at all times. And to be highly focused, observe the dashboard, control the knob, and inadvertently lead to the failure of the test process, which will waste a lot of valuable time for the tester. The F-Sorb 2400 ratio surface area tester is an instrument that can truly achieve the BET method detection function(with a direct comparison method). The more important F-Sorb 2400 ratio surface area tester is the only fully automated and intelligent surface area detection device in China so far., Its test results are highly consistent with international standards and have good stability. At the same time, it reduces human error and improves the accuracy of test results.

 

Other Activated Carbon

Adsorption Activated Carbon,Dry Activated Carbon Desiccant,Graphite Particles Carbon Agent,Capacit Granular Activated Carbon

NINGXIA SINOTOPSKY INTERNATIONAL TRADING CO.,LTD. , https://www.nxsinotopsky.com