Selection of bearing equipment

Home>Bearing knowledge>Selection of bearing equipment
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Selection of bearing equipment

Source: China Bearing Network Time: 2014-10-15

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Generally; the shaft is supported by two bearings in the radial direction and the axial direction; the bearing on one side is called a fixed end bearing; it accepts both radial and axial loads; and the relative relationship between the fixed shaft and the bearing housing The effect of axial displacement. The other side is called the free end; only the radial load is accepted; the axial direction can be relatively moved.
Fixed-end bearings need to be fixed together with the shaft and bearing housing; suitable bearings are capable of accepting composite load radial bearings; for example; deep groove ball bearings, spherical roller bearings and double or mating angular contact ball bearings or cones Roller bearings. Radial bearing combinations that accept simple radial loads; such as cylindrical roller bearings with inner and outer rings without ribs combined with deep groove ball bearings or four-point ball bearings or two-way thrust bearings; End bearing. At this time; the second bearing is supplied in two-way axial position; however, it is necessary to maintain a certain radial distance from the bearing housing when the device is installed. The free end bearing is thermally expanded in the shaft; when the length changes, the bearing does not occur. Pinch. Axial displacement can occur inside the bearing; can also occur in the bearing ring and bearing housing.
“Plug-in” refers to a bearing arrangement in which each bearing is unidirectionally positioned to the shaft; and in the opposite direction. This combination is primarily used for short shafts. All radial bearings that accept at least one axial load in one direction Suitable for both; including deep groove and angular touch ball bearings, tapered roller bearings and NJ cylindrical roller bearings; when using angular touch ball bearings or tapered roller bearings; in some cases; it is necessary to apply preload.
Recommend to friends comments close window

Bearing related knowledge
The focus of KOYO bearing selection is the failure of the sliding bearing. The details of the problem are that the rolling bearing is diagnosed and the characteristics of the ball bearing are measured.


This article links to http://
Please indicate the bearing network http://

Previous: Oil-free smooth bearing series Next: Things to be observed before installing bearings

Product categorie of Die Casting Mould, we are specialized manufacturer in producing Aluminum Die Casting Mould, Zinc Die Casting Mould, offer Die Casting Mould R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!

Die casting mould industry has developed rapidly in our country, the total output growth significantly, domestic die Casting Mold production after the United States, has become the second in the world, become the veritable die-casting superpower. It can have such achievement because of our country with unique broad market advantages and relatively cheap labor force. Depend on very obvious price in the international trade market, we produced the die casting mould which occupies a bigger superiority, according to the situation, in the future Chinese die casting industry development prospects are very broad.

Die Casting Mould

Die Casting Mould,Die Casting Tooling,Casting Mold,High Presssure Casting Tooling

Ningbo Bowang Machinery Co.,Ltd , http://en.zjbwjx.com