There are many ways to decorate the stone. The floor coverings we usually see are all made of marble and strive to be uniform in color. However, the stone can also be combined with the wooden floor to make it unique and beautiful. Many of the model maps have a combination of stone and floor. They don't use decorative lines. The overall space is unique and modern. How can this be combined seamlessly?
1. When the paving is put, the stone and the wooden floor are directly hit hard. The 3mm floor expansion joint is reserved at the intersection of the floor and the marble rim. The weathering glue is used in the same color as the floor to prevent contamination of the finished product and control the width of the glue. Degree, you need to first use textured paper to locate the glue).
2. The iron piece is connected by stainless steel L-shaped, pressed on the underground of the wooden board, and the seam produced in the middle is filled with the color glue of the floor or stone, and the floor and the stone are flat.
3. If the stone is chamfered, it will be slightly higher than the floor surface.
4. The side of the stone is open, and the floor is inserted into the mouth opened by the stone, which will be higher than the floor surface.
Fishing Magnet,Rare Earth Fishing Magnets,Neodymium Fishing Magnet,Fishing Ndfeb Magnet
Honesun Industrial Co.,Limited , https://www.chinamagnetise.com