When tiling, we must also pay attention to it, and we can do a good job for the tiles to be beautiful.
Mona Lisa Tiles
First, before paving:
1, kitchen floor tiles should not be too large specifications, the overall size is too large to feel uncoordinated, and at the same time not easy to install floor drain. General kitchen tiles are mostly 300*300 or 330*330.
2. Do brick rowing before paving, try not to appear less than a third of the narrow columns. It must be processed and cut, and it is advisable that after the tile is cut, it should be greater than two-thirds.
3, before paving, confirm the tiles used in the kitchen walls and other places to prevent the confusion of kitchen tiles, so as to avoid the kitchen tiles to the toilet to the wrong place.
4, the bathroom and then tile the front wall of the tile need to do waterproof treatment, if you take the first paste the tile after the way, in the tile before the need to do a closed water test, the best ground for waterproofing;
5. Before paving, remember to keep track of the line of the wall surface water pipes. It is best to keep the circuit and water route maps so that they can be easily searched during maintenance.
6, kitchen tiles If you choose the waist line and tile, we must consider the location of the tile waist line, the waist line along the cabinet in the cabinet along the good, the location of the tile paste should consider the cabinet pendant, the position of the hood, do not install these items Obstructed. Affect the overall coordination and aesthetics.
Second, when paving:
7. The cement used for cementing kitchen tiles is No. 425 cement. The proportion of cement sand should not be greater than 1:3. If the cement content is too heavy, the cracking of the tiles will be caused by the high expansion coefficient of the cement and the service life of the tiles will be reduced. .
8, kitchen and glazed wall tiles If you use cement mortar as a binder, tiles need to be soaked in water after the paving, soaking the time to tile is completely soaked not to take the bubble time is appropriate, usually thirty minutes That's it.
9, paving kitchen tiles whether it belongs to a seamless brick, you must leave the seam, it is recommended not less than 1mm, ordinary wall tiles to 1.5-2mm is appropriate, antique brick gap can be properly widened.
10. The paving height of kitchen tiles should be higher than that of ceilings, generally not less than 10 cm.
11, paving tiles pay attention to the texture of the tile, so smooth texture paving, tile waist line with positive and negative directions should pay attention to its direction, do not paste down, while the tile waist line texture and brick texture consistent.
Third, after paving:
12, staggering need to dry after the tile is appropriate. It is usually carried out after 24 hours.
13, After the ground tile is finished, you must wait for the ground to dry before walking around the brick or other kitchen and bathroom renovation projects.
14, after the tile to be checked, if you find a hollow place is best to be repaired and resurfaced in troubled areas.
15, wall punching needs attention, it is best in the drilling hole in the same time as the water spray for cooling treatment, to prevent the tile due to local short-term dramatic temperature changes caused by the tiles burst.
16. When the wall is punched, it is necessary to check whether there is empty drum, and check the pipeline diagram of the hydropower reform that is retained, and do not hit the pipeline.
Links: How to Accept the Quality of Tiles
Tile Laying Tiles Floor tiles Cement Kitchen doors Kitchen ceiling tiles Antique tiles Kitchen wall tiles Bathroom tiles Bathroom tiles Bathroom ceilings Overall bathroom Bathrooms and toilets Floor tiles Kitchen tiles Ceramic tiles
Yishen Wire Mesh Products Co., Ltd. , http://www.hsgabionmesh.com