If you live in a house for a long time, it will not only look old, but also cause various problems. At this time, everyone needs to reinstall the old house. The renovation of old houses is not an easy task. We must not only refurbish the walls, but also reinstall the hidden process. How do we decorate the old houses ? What are the notes on the old house decoration? The following small series Will share with you on these issues, and look forward to helping those in need.
How to Renovate an Old House - Hydropower Renovation
When the house is inhabited for a long time, various problems will arise, such as corrosion and aging of water pipes and wires. If your house's old house water pipe is a galvanized pipe, it is better to replace it with an environmental-friendly PVC pipe; if the old house is an aluminum wire, it is better to be replaced by a copper wire. Hydroelectric reform is a technical activity. It is recommended that you hire a professional master to carry out the construction to ensure the quality of construction.
How to Renovate an Old House - Replace Old Doors and Windows
The aging of windows and doors is also a common problem in old houses. Once the doors and windows are old, it will not only affect the beauty of the house, but also affect the comfort of people's lives. Therefore, people should renovate or replace the old doors and windows. If your doors and windows are wooden, you can usually renovate the appearance by simply painting the paint from scratch. If the doors and windows of your home are made of steel, once you have fallen or even cracked, it will be difficult to restore the original shape. Basically, you need to withdraw. replace.
How to Renovate Old Houses - Renovate Damaged Wall Ground
Wall peeling and dropping dregs are also one of the problems that often occur in old houses. In order to make the old room look fresh and new, everyone is better to remove old walls and re-scrape putty and latex paint. In addition, we also have to refurbish the wood floors in our homes. It is worth noting that only solid wood flooring, laminate flooring and bamboo flooring with a surface thickness of 4 mm can be renovated!
How to Renovate Old Houses - Replace Old Furniture
The above three points are the key to the renovation of old houses. In addition, we must also replace the old furniture in the home, otherwise the effect of the renovation of old houses is not so obvious. When choosing furniture, everyone should consider the style of home improvement and the budget for decoration. This will not only guarantee the effect of decoration, but also achieve the purpose of saving money.
What are the existing home decoration notices
1. When refurbishing an old house, everyone should check whether the original water pipes and wires are aging and whether the layout is reasonable;
2. Everyone must fully consider the structural safety of the house when dismantling the old house, and do not remove the bearing wall;
3. In the renovation of the old house, everyone should also arrange the construction time reasonably so as not to disturb the people;
4. When everyone refurbished the old house, they also checked whether the waterproof of the kitchen bathroom was qualified.
5. Before you refurbish the old house, it is best to make a reasonable design in advance so that the indoor space can be maximally utilized.
The above is about how to decorate the old house and the old house decoration five relevant matters related to sharing, the old house decoration seems simple, in fact, is not simple, everyone in the transformation of the old house, should pay attention to the above mentioned in the article Oh! If you have more related questions, welcome to continue to pay attention to this site, and later will bring more exciting content for everyone.
We supply full range of abrasive tools, such as Flap Disc adhesive, Flap Disc Backing Pad, Abrasive Flap Disc , Flap Wheels , flap wheel with shaft, Abrasive Sanding Disc, Abrasive Machine , etc...
both one component epoxy adhesive and two component epoxy adhesive.
Specifications for single component epoxy adhesive for flap disc:
Appearance: Colloidal
Color: Blue / White
Odour: Slight odour
Proportion(water=1):1.42
Viscosity (25℃, mpa.s): 15000~20000
Storage time: 5℃ 6 months
Recommended curing condition: 110~130℃×4~3 hours or 150~160℃×1 hour
Hardness(Shore D): ≥90
Recommended temperture on the machine: 40-52 degree
Shearing strength(23℃, steel/steel, MPa): ≥22
Flap Wheel Glue Instructions
According to the ambient temperature, preheat adhesive among 41 ~ 46℃ before pumping into the pumping system.
Note:
1.When climate is colder, adjust preheating temperature 3 ~ 5℃ higher than normal.
2.Before use large quantities,a small quantity should be used for test.
3.This flap disc glue is a chemical product, can cause weak corrosive to skin, please note that the use of the appropriate protection, such as inadvertent contact with the skin with plenty of water rinse or alcohol wash.
4.Baking temperature is particularly important for product quality. The data provided by us is tested under accurate oven temperature control. We are strongly advised customer should adjust oven temperature according to the customer's on site condition.
Storage and transportation
Flap Disc Adhesive resin glue should keep in cool, ventilated warehouse, temperature does not exceed 40℃, relative humidity of not more than 85% ,this product is not special goods, according to the general cargo transport.
Flap Disc Adhesive Glue,Flap Wheel Glue,2 Component Epoxy Glue,Flap Wheel Adhesive,Epoxy Resin Flap Wheel Glue
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com