Industrial Flux Air Chipper & Air Hammer Tools in Pistol Type (HN-F001)

Name: Air Flux Chipper & Air Hammer

Model No.: HN-F001


Features:
1.Soft handle for better comfort.
2.Powerful heavy duty flux chipper
3.Ideal for all chipping operations including removal of slag, scale, welds and masonry
4.Easy to change the chip.


Specification:
 


Image Details:



Connectivity:
Air Supply & Pressure
• Always use a clean and dry air supply to operate the tool at 90psi.
• To ensure operating safety, performance and prevent damage to the tool do not operate exceed the maximum working air pressure.
Air Line
• Use a fitting air hose for connection between the compressor & tools.
• Ensure that the compressed air is cooled and its water content filtered and lubricated as required as shown in Fig 1 below.
• Excessive moisture levels can be compressed in the pipe and can permeate into tools & equipment resulting in mechanical failures and possible
injury.
Air Hose
• Ensure all hoses and fittings are clean and free of dust and debris before connecting any tools and equipment.
• Dust and debris can cause rust and malfunction in the tools and can result in dangerous operation.
 
FAQ:

1.Q: Can you send us samples
A: We are pleased to send you the sample to test the quality and market.

2.Q: About your products, could you do it OEM?
 A: Yes, OEM is workable for us, but with MOQ.

3.Q: Have you guarantee for your products?
 A: Normally we provide half year guarantee with spare parts supply.

4.Q: Do you also provide spare parts of pneumatic tools? 
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some vulnerable parts.

5.Q: For the product, could you spray other color of painting?
A: Yes, color can be customized but with MOQ.

6.Q: Can you inform us about the inner box?
A: We have 2 choices for inner box: ?neutral box(white-box & neutral color box) and customized color box with MOQ.

7.Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.

8.Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.

9.Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.

10.Q: How does your factory do regarding quality control?
A: HUNEER People always pay great attention to quality control from the very beginning, and every product was tested piece by piece before delivery.


 

Furniture Hardware

Furniture Hardware,Wardrobe Drawer Door,Hardware Accessories Metal,Furniture Hardware Kitchen Cabinet

ChongQing Troya Hardware Manufacture Co., Ltd , https://www.troyahardware.com