Overview: The special coating for drinking water equipment is based on IPN8710 Polyurethane Polyethylene Coatings and a new generation of non-toxic paint developed with epoxy water tank coating. It is modified by epoxy resin and polyurethane resin, and is added with no toxic fillers and additives. Such as composition, with good corrosion resistance, rust resistance, strong adhesion, fast drying, non-toxic, non-irritating properties after curing. The hygiene and safety of the coating complies with the hygiene requirements for the soaking water of protective materials in the “Regulations for the Safety Assessment of Drinking Water Distribution Equipment and Protective Materials for Drinking Water†of the Ministry of Health.
Scope of application: The IPN8710-2B special equipment for drinking water equipment is applicable to the equipments contacted by drinking water, the surface anticorrosion and the anticorrosion and coating of concrete surfaces such as water tanks, water tanks and other surfaces.
Construction parameters: ratio: (mass ratio to barrel labeling): A: B = 5:1
Color: Primer: Colorless or iron red; Finish: Various colors (half light)
Theoretical dosage: colorless primer 80-100g/m2, iron red primer 130-150g/m2, colored finish 120-140g/m2
Drying time: (25°C) dry for 2 hours, dry for 24 hours; complete cure 72 hours. Coating thickness: colorless primer 30-35μm, iron-red primer 40-45μm, topcoat 40-45μm
Coating interval: the shortest 4 hours, the longest 7 days Construction method: spraying, brushing, roller coating curing time: two-component (25 °C) 8-10 minutes, 4 hours spent thinner: T-002 drinking water coating Special thinner, maximum dilution ≤ 5%
Surface treatment: remove surface oxide scale, welding slag, floating rust, oil, dust, etc. on the surface of the object to meet the Swedish standard rust standard St2 matching paint: primer: IPN8710-2B primer, FY-86-1A/2A,
FY-86-2D/3D/4D Finish: IPN8710-2B Dedicated coating for drinking water equipment Shelf life: 12 months Packing specification: The bottom and top coat are packed in 18 litre containers, and the hardener is in 4 litre containers. (The weight is based on the barrel sticker)
Precautions:
1: The material must be planned during construction. The paint is mixed according to the proportion, fully stirred and allowed to stand for 5-10 minutes before being applied, and the rest of the materials cannot be poured back to the original barrel; the paint must be applied before the paint is dry on the front surface;
2: The pipeline interface should pay attention to the removal of dirt, water traces, pay attention to avoid damage to the anti-corrosion coating backfill;
3: The winding glass fiber cloth must be flattened and the mesh is filled with paint;
4: The painted object should avoid damage during transportation and hoisting;
5: The construction site should pay attention to ventilation, rain, snow, fog days should not be outdoor construction, paint should be placed in a cool, ventilated, dry place, and isolated fire.
Technical parameters: refer to the comprehensive parameters in the IPN8710 polyurethane polyethylene interpenetrating network coating profile
Scope of application: The IPN8710-2B special equipment for drinking water equipment is applicable to the equipments contacted by drinking water, the surface anticorrosion and the anticorrosion and coating of concrete surfaces such as water tanks, water tanks and other surfaces.
Construction parameters: ratio: (mass ratio to barrel labeling): A: B = 5:1
Color: Primer: Colorless or iron red; Finish: Various colors (half light)
Theoretical dosage: colorless primer 80-100g/m2, iron red primer 130-150g/m2, colored finish 120-140g/m2
Drying time: (25°C) dry for 2 hours, dry for 24 hours; complete cure 72 hours. Coating thickness: colorless primer 30-35μm, iron-red primer 40-45μm, topcoat 40-45μm
Coating interval: the shortest 4 hours, the longest 7 days Construction method: spraying, brushing, roller coating curing time: two-component (25 °C) 8-10 minutes, 4 hours spent thinner: T-002 drinking water coating Special thinner, maximum dilution ≤ 5%
Surface treatment: remove surface oxide scale, welding slag, floating rust, oil, dust, etc. on the surface of the object to meet the Swedish standard rust standard St2 matching paint: primer: IPN8710-2B primer, FY-86-1A/2A,
FY-86-2D/3D/4D Finish: IPN8710-2B Dedicated coating for drinking water equipment Shelf life: 12 months Packing specification: The bottom and top coat are packed in 18 litre containers, and the hardener is in 4 litre containers. (The weight is based on the barrel sticker)
Precautions:
1: The material must be planned during construction. The paint is mixed according to the proportion, fully stirred and allowed to stand for 5-10 minutes before being applied, and the rest of the materials cannot be poured back to the original barrel; the paint must be applied before the paint is dry on the front surface;
2: The pipeline interface should pay attention to the removal of dirt, water traces, pay attention to avoid damage to the anti-corrosion coating backfill;
3: The winding glass fiber cloth must be flattened and the mesh is filled with paint;
4: The painted object should avoid damage during transportation and hoisting;
5: The construction site should pay attention to ventilation, rain, snow, fog days should not be outdoor construction, paint should be placed in a cool, ventilated, dry place, and isolated fire.
Technical parameters: refer to the comprehensive parameters in the IPN8710 polyurethane polyethylene interpenetrating network coating profile
Lubrication Pump 2L,Gear Lube Pump,Electric Grease Pump,Gear Lube Oil Pump
Yantai Ciso Lubrication Technology Co.,LTD , https://www.cisolubrication.com