In the past, the material returning devices we used on the punching machines were generally dedicated to the special model, and some of the structures were complicated and the volume was large. To this end, I made a simple material return device, which is described as follows: 1. Structure principle The structure of the simple material return device is shown in the figure. It is composed of the stripping plate 1, the torsion spring 2, the bracket 3 and the support 4 and the like. The stripping plate 1 takes the bracket 3 as a rotating shaft, and the downward movement of the upper mold 11 generates a pressure on the stripping plate 1 to rotate it toward the outer direction of the mold. Always maintain a direction of the stripper 1 by the torsion spring 2
Mountain Protection Mesh,Mountain Protection Net,Gabion Wall,Rock Netting
ANPING HONGYU WIREMESH CO.,LTD , https://www.hongyu-wiremesh.com