Not long ago, China Machine Tool Industry Association released the "2010 World Metalworking Machine Tool Production and Consumption Survey", the survey pointed out that the Japanese machine tool industry experienced a 59% heavy recession in 2009, after a full rebound in 2010, return to the machine tool The location of the two major producing countries. Perhaps it has not yet had time to celebrate the performance of 2010. On March 11, a major earthquake struck Japan. Both the normal life of the people and the economic development of the country have been greatly affected. Japanese industry with electronics, machinery and automobiles as its core industries will also face serious challenges. Fortunately, most Japanese machine tool companies have not been directly affected by the earthquake. It is because of the large-scale power cut caused by the earthquake that the factory is unable to produce normally, and the logistics is blocked after the earthquake, and the normal operation of the enterprise in the short term. Have a certain impact. Japanese machine tool companies calmly faced the impact of the 9th-level strong earthquake on the entire manufacturing industry in Japan, but the performance of Japanese companies responding calmly is admirable. The reporter learned from the relevant reports that Japan Mori Seiki Co., Ltd. announced the customer notification letter on its official website in the first time. The notice first expressed sympathy and condolences to all customers who suffered from the Northeast earthquake, and announced Senjing. The emergency support contact information of the machine indicates that it will fully assist each customer's equipment to resume production as soon as possible and guarantee the delivery time of the new machine. At the same time, Mori Seiki also reported the situation of its own company and employees to all those who care and support the company through the notification letter, saying that “all of our employees and family members are safe.†According to the introduction, The company did not suffer any damage in the facilities of Iga, Nara, Sun Industrial Machinery, Nagoya City, and Tokyo Office. In Chiba and Isehara, the company building was slightly damaged, but the damage was basically within one week. Get fixed. Since most of Japan's machine tool companies' factories have left the earthquake-stricken areas and have not been affected, the impact of the post-earthquake era on the Japanese economy will inevitably involve the Japanese machine tool industry. The reporter learned from a Japanese tool agent company in Beijing that the Japanese side has issued a notice that the new orders will be delayed. As for whether there will be a rise in product prices due to logistics failures, etc., it has not yet expressed its position. Due to the implementation of refined management, almost zero-stock Japanese component manufacturers have faced an embarrassing situation of insufficient supply capacity after the earthquake. Japan is the world's second largest exporter of machine tools. In 2007, the export value of machine tools was 7.46 billion US dollars, and in 2008 it was 8.52 billion US dollars. In 2009, it only slipped to third place, with exports amounting to 4.22 billion US dollars. Relying on the growing demand from countries such as China and India, in 2010, Japan’s machine tool industry’s export orders gradually increased, making it return to the status of the world’s second machine tool power. Some even believe that Japan will be able to rank first in the world in 2011. The machine tool produces the throne of a big country. If the earthquake did not happen, this wish may be possible. My machine tool parts industry is in urgent need of localization. The so-called “single-and-coming†system, and the Chinese machine tool industry that relies on Japan’s imports of high-end CNC systems and tools will face any impact. "This month, I can still rely on the stocks provided by Japanese companies to guarantee orders, but the Japanese side has clearly stated that it will not be available next month!" Lu Changrong, general manager of Nanjing CNC Machine Tool Co., Ltd., looked slightly sad. For most of the domestic high-end CNC machine tool manufacturers, the core components of CNC machine tools—the CNC system are mainly supplied by two major suppliers, Siemens of Germany and FANUC of Japan. The recent Japanese earthquake triggered a power cut in Tokyo headquarters, FANUC was unable to produce properly, and there was a temporary shortage of products. To this end, the company has to actively look for alternative manufacturers, if the search for no results, it is likely to cause the company's overall sales efficiency to decline over a period of time. Relevant people in the industry believe that although the impact of insufficient supply of spare parts in Japan is short-term, it exposes that China's machine tool industry is too dependent on imported systems and components. However, from another perspective, the earthquake in Japan may be against China. The transformation and upgrading of machine tool enterprises has played a certain stimulating role. In 2010, China imported 15.72 billion US dollars of machine tool tools, of which machine tool products were 9.42 billion US dollars, up 59.8% year-on-year, while domestic metal processing machine tools only increased by 35.1%. In 2010, Japan was affected by external demand such as emerging markets (China, India), and the order volume has been growing substantially since the beginning of 2010. In contrast, in 2010, China's machine tool exports were 7.03 billion US dollars, and the main products of the machine tool industry, metal processing machines, only exported 1.85 billion US dollars, most of which are low-end products that are not competitive in the market. Industry experts believe that the previous pulling effect of 4 trillion yuan of investment, the disconnection of domestic high-end machine tools and the tax incentives for the country to encourage the import of high-end machine tools are the reasons for the surge in imports of high-end machine tools. In addition to the host products, it is understood that China's domestic high-end machine tools with imported CNC system costs accounted for more than 60% of the cost of manufacturing, as well as the import dependence of cutting tools and other supporting parts is also high. All along, the state is vigorously supporting enterprises that encourage independent research and development of high-end CNC systems, and hopes to get rid of the dependence on the "foreign" system as soon as possible. The earthquake in Japan has in some ways aggravated the contradiction between supply and demand. It is believed that the Chinese enterprises will increase their R&D efforts, independent innovation and the acceptance of domestic CNC systems by users.
staircase light; outdoor step lightings; step wall recessed lights
HSONG LIGHTING CO,. LTD , https://www.hsonglighting.com