[Tip] know protective gloves material structure

Mechanical protection gloves material structure

Braided gloves: can be closely fitted to the person's hands, can ensure that the operation is extremely smart, improve work efficiency. Seamless structure to avoid inflammation caused by glove gaps.

Gloves are quilted and impregnated: They can provide a variety of structures and a variety of production methods, using cutting and sewing techniques. The impregnation layer (synthetic material) is in close contact with the fabric layer and has good wear resistance. Sewing and dipping processes can be used to produce thin gloves for better flexibility.

Coating: The woven or woven fabric lining is immersed in the compound required to process the glove so that the lining "supports" the properties of the corresponding compound and the corresponding advantages are obtained.

Dipped: The materials used will determine the following properties of the glove:

Shanghai Naomi: GW-1350DB nylon coated nitrile oil resistant gloves

Nitrile rubber: Excellent resistance to breakage, cutting, and puncture resistance; especially when gripped under dry conditions, excellent wear resistance.

Foamed Butyronitrile: Squeeze under wet and wet conditions.

Natural latex: Hold tight in dry and wet conditions.

Neoprene: Hold tight in dry, moist, lubricated conditions.

Polyurethane: Good abrasion resistance when gripped under dry conditions.

Polyvinyl chloride: Good abrasion resistance under dry, wet, and slick conditions.

Chemical and liquid glove construction

There is a skeleton: The compound needed to immerse the woven or woven fabric lining in the processing glove, so that the lining "supports" the properties of the corresponding compound and obtains corresponding advantages.

Skeleton-free: The gloves without lining, fabric layers are immersed directly in the compound required for processing gloves.

Lined: By woven or textile lining, mechanical protection from the inside of the glove can also be more effective in absorbing sweat from work.

Flocking: Fleece-lined gloves, covered with a layer of short cotton fibers, make the gloves easier to wear and improve comfort.

Unlined: There is no woven or textile lining inside the glove. Conventionally, when using dustless gloves, the operation is more dexterous and the touch is better, but the protection against mechanical risks is lower.

Other structural structures

With powder: Its design makes it more convenient to wear and is ideal for situations where gloves need to be changed frequently.

No powder: Consider the product pollution and other issues. It is the choice of a person whose skin is easily inflamed by powder.

Regardless of the left and right hands: gloves, regardless of the left and right hand, more convenient and more value.

Left and right hands: Gloves are divided into left and right hands, which are more suitable for hands and more flexible.

Protective gloves size construction

When choosing the exact size when ordering, it is possible to ensure that the gloves are worn comfortably. A soft tape measure can be used to measure data around the hand to determine the desired size. Put five fingers together and measure the circumference around it. The hand circumference (rounded by one-half inch, 1 inch = 2.54 cm) is equal to the glove size.

With this measure, it is impossible to include the possible differences in the sizes of different human hands. For example, some employees may have long fingers, while others may have short fingers. In actual use, employees may find that the size of the large (small) half or even the large (small) full size is more comfortable to wear than the size of their own hands.