A brief measurement of FAG bearing errors

Home>Bearing knowledge>A brief measurement of FAG bearing errors
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

A brief measurement of FAG bearing errors

Source: Bearing network time: 2018-02-28
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
In the selection of the use of FAG bearings; must pay attention to its error scale. Do not know the FAG bearing error specifications; the selected bearings can not be used normally.
FAG imported bearing measurement error; should be less than 10% of the public service. The usual measurement error is 10% to 33% of the difference in combat power; and with the progress of the public service level; the greater the share of errors; that is, the public service蟛钏嫉 壤 壤 壤 壤 畲 畲 畲 畲 畲 IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT Qualified according to the specifications.
Recommend to friends comments close window

Bearing related knowledge
The characteristics and protection of the rolling mill bearing indicate that the bearing in the operation needs to pay attention to what matters the layout and function of the "cylindrical roller bearing". The small low-torque angle touch ball bearing used by Seiko's listed robots
Analysis of additional load on SKF bearings


This article links to http://
Please indicate China Bearing Network http://

Previous:Application of fine rolling bearings in electronic special equipment (2)
The next section: The primary characteristics of deep groove ball bearings and the associated use

PA6 is recognized as the most widely used and known engineering plastic in the current market. PA6 has the best performance, very tough, even at low temperatures, and high surface hardness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level materials. It`s widely used in a variety of mechanical structures and spare parts. Compared to PA6, PA66 own the higher hardness, rigidity, better resistance to wear and heat deflection temperature. Temperature resistance from -40℃ to 110 ℃. 


  • Advantages:
    ♦ High strength and stiffness 
    ♦ High impact and notch impact strength 
    ♦ High heat deflection temperature
    ♦ Good at dampening 
    ♦ Good abrasion resistance
    ♦ Low coefficient of friction
    ♦ Good chemical stability against organic solvents and fuels
    ♦ Excellent electrical properties, ease of printing and dyeing
    ♦ Food safe, noise reduction

    Disadvantages:
    ♦ Poor dimension stability, electrical and mechanical properties may become affected by absorbing moisture or water
    ♦ Poor acidproof ability, can`t dye with acid or touch overmuch acid
    ♦ Poor lightfastness, poor endurance in pollution

2

PA6 Sheet

White Pa6 Sheet, Brown Pa6 Sheet, Nylon Pa6 Sheet, Cast Nylon Pa6 Sheet

SHENZHEN XIONGYIHUA PLASTIC INSULATION LTD , https://www.xyhplastic.com