Acceptance criteria for curing epoxy floor of floor epoxy floor paint

When we decorate the house, we will use paint and other building materials. Since the middle and late of the last century, there have been many clean floor paints in Europe and the United States. It uses an integral polymer surface layer called epoxy floor paint. The main components are epoxy resin and curing agent. Next, let's take a look at the wonderful content of the ground epoxy floor paint .


地面环氧地坪漆


First, the maintenance of the ground epoxy floor paint:


Epoxy floor paint is a high-value, high-quality, high-demand product. The correct method of use can keep the ground as new and can be used for a long period of time.


The specific recommendations are as follows:


1. After the construction of the flat land is completed, it needs to be maintained for 7-10 days before it can be put into use. During the curing period, water or other solution should be avoided to infiltrate the surface.


2. Any employee who enters the workshop must be replaced with a rubber-soled shoe (no black-soled shoes with a foam bottom) (to avoid the sand from the outside being scratched into the workshop)


3. Any hardware: such as iron chairs, iron tables and iron shelves, etc., the feet should be wrapped with soft plastic, rubber or paper to avoid scratching the ground during use.


4, the tractor needs to fully lift the board off the ground, please pay special attention to the corner of the board when cornering, do not scratch the ground


5, when cleaning the ground, please use a soft absorbent or a wet and dry vacuum cleaner, can be cleaned with water or detergent, but please pay attention to the ground slippery


6. If it is worn or scratched due to long use time, local repair can be carried out in a small area. If the area is large, it is recommended to re-roll once.


7. Before the equipment enters the factory, lay the bottom of the cardboard box on the floor to avoid scratching the ground during transportation.


8, the cart, the wheel of the board, please use hard or elastic rubber wheel, and use separately inside and outside the factory


9, can be waxed according to the ground requirements (the effect can prevent ground scratches)


Second, the acceptance criteria for epoxy floor


地面环氧地坪漆


1. When the ambient temperature is 25 °C, it should be 2-3 days after construction, that is, the hardness reaches about 80% of the completion of curing;


2, the surface can not appear sticky;


3, air bubbles: flat coating type, mortar type without bubbles, self-leveling allows 1 small bubble / 10 square meters;


4, good leveling, no knives, large-area interface is basically flat;


5, no floating color, uniform color, large-area interface allows for extremely inconspicuous color difference;


6, no coarse impurities, but allow the floating dust in the air to fall into the smallest defects caused;


7, the surface of the floor should be smooth and smooth, the gloss should meet the design requirements (high gloss ≥ 90, light ≥ 70, half light 50 ~ 70), flat coating type is light, water is semi-gloss ~ no light;


8, orange peel, mortar anti-slip surface effect should be very obvious. , no volatile organic emissions, is widely used in the finishing of modern industrial flooring.


How about, read Xiaobian’s introduction to the ground epoxy floor paint, did you know a lot about the ground epoxy floor paint? I hope you can use this article as a reference in your future life. Go and choose your preferred floor epoxy floor paint to create a safer home environment. Thank you for your reading of this article and your support and love for Xiaobian. If you want to get more home improvement information, please continue to pay attention to the decoration home network.


More related wonderful reading:

Epoxy floor paint construction process epoxy floor advantages

Epoxy floor paint quota characteristics, what is the quota of epoxy floor paint

What are the epoxy floor paint brands? Epoxy floor paint purchase method

What is the unit price of epoxy floor paint? Advantages of epoxy floor paint

Anti-static epoxy floor paint features anti-static epoxy floor paint construction

PVC coated fibreglass yarn, resists dents. Simple installation with good visibility.
PVC coated polyester yarn, unique knit provides a barrier for pollen and dust. 87% blockage of pollen.
PVC coated polyester yarn, heavyweight material withstands damage from pets and children. Six times tougher than fibreglass screening.
UV stabilised high density polyethylene yarn resistant to UV and corrosion. Four times tougher than fibreglass screening.
Heavy duty alloy, powder coated mesh resists harsh weather conditions. Ember Defender bushfire protection. Available by the metre.
Attaches flyscreen inside window frames. Clear appearance suitable for all frame colours. Suitable for various flyscreens. Bulk pack suitable for the trade.

Insect Screen And Accessories

Insect Screen, Insect Screen Accessories,Insect Screen,PVC Spline,plastic buton, plastic part, spare parts

Hebei Charlotte Enterprise Co., Ltd. , https://www.cnscreening.com