I do n’t know if you have found that more and more people have chosen to “customize†their homes in the past two years.
Aesthetics and consciousness are improving. Choose design furniture to satisfy the apartment and enhance happiness.
This is a good thing.
But I must say. The custom-made furniture is quite deep inside, there are countless loopholes that can be drilled, and there are countless pets.
Knowing how to do things is like getting fish out of water.
Want to customize, first figure out "solid wood" and "plate"
At present, most of the wooden furniture on the market is customized, and the raw materials are nothing more than solid wood or plate .
Solid wood is pure natural wood made from a whole piece of wood . All solid wood is called pure solid wood.
Solid wood furniture is based on the original wooden board, and at most apply a varnish or wood wax oil .
There is also a kind of solid wood furniture called "combination of board and wood" , which is mixed with solid wood and plate . This kind of wood furniture can also be called solid wood furniture. The country allows it .
The board is not so particular, artificial wood is made of non-wood plants such as wood or straw. Of course, the brand plate uses good materials .
Panel furniture is furniture made of sheet metal.
To ask me which one is better, I can only say that each has its own merits.
Solid wood furniture
No longer a representative of the rustic and thick old generation, the ancient wisdom finally has a young beauty.
Environmentally friendly and durable , with a touch of woody fragrance.
Born with excellent texture and texture, there is relatively little formaldehyde , and it is unreasonable to sell cheaply.
Source: Self-portrait by Zhu Fan
It is friendly to people and also very friendly to insects , so it is necessary to prevent insects and take care of maintenance.
Of course, the biggest disadvantage of solid wood furniture is still expensive.
plate-type furniture
The cost is low and most people can afford it. It is not as precious as solid wood, and it is not easy to deform and crack .
Sturdy and wear-resistant , the texture of the simulated pattern is very similar to solid wood, and the high cost performance is more popular with the public.
IKEA furniture is the representative of the panel furniture brand.
Source: IKEA official website
Panel furniture is most afraid that the merchant will give you a bad board, and the formaldehyde will exceed the standard in minutes .
How to choose solid wood vs board?
Custom furniture can make full use of limited space, and is more suitable for its own layout than finished furniture, especially for small units .
Both solid wood and board can be customized furniture.
From the type of furniture
The solid wood can be customized in a wide range , from cabinets to sofas and desks to coffee tables and chairs.
Sheet customization is the common " full house custom furniture " on the market, which basically does not include tables and chairs, and usually only accept cabinet customization , such as wardrobes, shoe cabinets, and sideboards.
From the design plan
Solid wood customization provides a "private" design plan , which can be customized from size, color to internal separation, the purpose is unique .
A pet cabinet customized for cats
For example: the solid wood is custom-made as a partition, and the wall and door are more beautiful and practical than the partition wall.
Plate customization provides a "popular" practical solution . In addition to the size and color, the internal divider uses a fixed template to meet basic needs and meet the public's aesthetic.
Source: Self-portrait by Zhu Fan
Source: Self-portrait by Zhu Fan
In short, solid wood customization is preferred for trenches with large budgets; ordinary budget selection board customization, saves money and is not bad in appearance.
The board family is huge, you have to distinguish between good and bad
Dozens of kinds of plates have so many flower names that you are ashamed. It's impossible to tell who is who, let alone what the difference is, and I'm being fooled by various gimmicks from the merchants.
Many people who are spending a lot of money buying furniture are pitted. They are convinced that they are made of solid wood boards, but they are actually low-quality finger jointed boards.
Want to distinguish the difference between plates, so easy !!!!!!!!!!!
Simply put, plates are like dumplings.
Dumpling stuffing is equivalent to the core of the plate, which is the base material of the plate.
Dumpling skin, which is equivalent to the skin of the plate, is a finish of the plate.
In the past, we have selected the plates with high netizens' attention, and we have done everything in one go.
1
Plywood
Cut a large tree into a thin layer of 3mm-18mm .
The plates that are glued together are plywood.
The number of layers is generally 3-13 odd-numbered layers, which look like wafer boards from the side .
It is also called "plywood" and "multilayer board" because it is layered and sticky.
The so-called multi-layer solid wood board is actually plywood.
Named according to the number of clips, it can also be called "plywood" . Or named according to the thickness of the board, it can also be called "nine centigrade board" .
This method of naming the mezzanine is relatively rare, and the only common name is the plywood . Named according to the thickness is very common, five, and seven per cent, there are nine PCT.
Performance & Use
Moisture and deformation resistance, and good bearing capacity. The easy-to-process and difficult-to-design special-shaped homes have natural advantages.
Suitable for furniture cabinet, cabinet door, back plate, bottom plate.
Very suitable for near-water spaces , especially in humid areas in the south.
There is no beautiful wood grain on the surface of plywood.
If the cabinet door is painted directly , it will not look good, and other decorations will be added to the surface .
For example, use a good-looking, solid wood sheet with a thickness of about 2 mm and stick it on plywood.
2
Fiberboard (Density Board)
It is similar to the production process of particle board, except that the particle board is to break the wood into wood shavings, and the fiber board is to grind the wood into powder .
When high-pressure spraying glue is used to press fiberboard, more and less force is used, and the density of the pressed board is different, so the fiberboard is also called "density board".
There are three kinds of high-density fiberboard, low-density fiberboard, low-density board quality is too bad, high-density board weight is too heavy and too expensive, only medium-density board (MDF) is the most suitable and most commonly used .
Performance & Use
The biggest shortcoming is that it is not moisture-proof, and it will deform when it sees water vapor .
Not suitable for use in places such as toilets that are prone to moisture. In particular, pay special attention to returning from the South to the South.
Bearing capacity difference, can not be a cabinet.
Only suitable for cabinet doors, or used in non-load bearing places , such as the backboard of the cabinet.
The smooth surface of the fiberboard is especially suitable for secondary processing. Painting or pasting a pattern is not a problem. Those who like fancy can do door carving .
3
Particleboard (particle board)
The trunk, branches, twigs, turf, straw and other materials are planed into pieces, which are pressed into high-pressure spray glue to make a solid porcelain board.
Particleboard is also called particle board. In order to make it sound expensive, it is called "solid wood particle board" by many businesses .
In fact, solid wood particle board is a particle board with slightly better quality . Wood shavings are made of wood, without scraps like turf straw.
The best quality solid wood particle board , wood shavings should not only use wood, but also the best wood in the trunk part, not even the branches and branches
Particleboard is the most used board on the market.
Because the miscellaneous brand particle board is made of miscellaneous wood mixed with grass residue, the cost is low, and it can be produced by a small factory.
When buying particle board, you must choose a big brand, the board itself can be better, and the edge sealing can also be better (the edge sealing prevents the formaldehyde from spreading and preventing moisture) .
Performance & Use
It has good load-bearing property, is not easy to deform, and its performance is relatively balanced.
The load-bearing cabinets and doors suitable for furniture are the main push plates of major custom furniture brands.
In terms of moisture resistance, particle board is similar to plywood , and can be used in kitchen cabinets.
Geographically, southern cabinets prefer plywood and northern cabinets use particleboard .
4
Blockboard (large core board)
Blockboard, large core board, wood core board, wood board are all it.
The Ma Liu deck, which is often said, can be said to be a relatively good quality blockboard .
Use small wooden strips to splice the board core, and then apply glue on both sides before pressing a thin layer of wood. It is easy for businesses to cut corners on the core .
Poplar, birch, and pine are better for splicing the small wooden strips, and it is also useful for reducing costs.
Performance & Use
Blockboard has good load-bearing capacity and good nail-holding power, and is suitable for load-bearing places. It is generally used as a frame or base for stereotyped support .
Face Mask Maker,Mask Making Machine Price,Mask Manufacturing Machine,Ultrasonic Folding Mask Machine
Dongguan Huitong Automatic Machinery Technology Co., Ltd , https://www.medicalmaskmachines.com