Precision processing of small and medium-sized shaft parts in an economical manner

The Telenhaus process shows us a way to precisely machine the surface of small and medium-sized parts in an economical way. Successfully using the cost-effective variant NC11 in the Center-Star series of machines, you can take advantage of the Superfinish-/Microfinish process for medium and large companies and even small businesses. On flexible universal machines, all shaft-shaped parts, such as gearboxes, crankshafts, eccentric shafts, equalizing shafts and distribution shafts, or racks with regular or cyclically running conveyor belts up to 700 mm, can be used with Stein. The tool is wet or dry. Depending on the machining task and part shape, you can choose to use 3 or 2 jaw chucks, spring chucks or brake shafts, or to secure the part between the peaks.
With the new Center-Star, it is possible to achieve a roughness Rz < 0.3 μm, an increased load ratio of <95%, and a significant improvement in the volatility that occurs during processing. After placing the part into the preset diamond guide, close the door of the work chamber and the machining will be done automatically. After the process control cycle is over, the protective door opens automatically and the part can be removed. For assembly line assembly, loading and unloading of the machine can also be done with a robot or door type loader.
In terms of cleaning, the detergent device is placed on the bed for easy removal, and the space occupied is small. It can be driven with oil or emulsion. The manufacturer will provide an optional minimum amount of lubrication. The manufacturer believes that the only sloping bed structure in this section is very conducive to sewage and operation. The bed calculated according to the finite element method has a high degree of fixation and has a long life.
Simple and flexible adjustment of two centrally lubricated NC axes by programming the control system
This allows a Microfinish device to machine different parts in sequence on a number of axes. Processing can be carried out according to the total length. The modular solution can be divided into different machining units, while the machine can be flexibly adapted to the requirements of various tasks.

Solar And Wind Light

Solar And Wind Light,Solar Hybrid Light With Wind,Wind Solar Hybrid Lamps,Solar Wind Hybrid Lamp

Yantai LUHAO Lighting CO.,Ltd , https://www.luhaolight.com