Construction sequence:
1. Remove dust and dirt on the surface of wooden products and lines (wood base).
2. Trimming the burrs on the surface of the wood substrate, lifting the flaws, etc., and polishing with a sand leather to make the corners neat.
3. Use oily putty (or transparent putty) to scrape, polish, refill and putty after putty (when using varnish, first make up brown eyes, nail holes, and do local color repair work).
4. Apply the paint over the first pass, refill the putty, remove the surface dust after polishing.
5. Apply the second pass of the paint. After polishing, remove the surface dust and perform water milling with the sand skin to repair the hanging oil.
6. Apply the third pass of paint until the desired result is achieved.
Construction methods: brush, roller, and spray have different lengths, and they should be taken separately.
The roller coating is suitable for large-area construction and is more efficient than brushing, but it will have a fish-like skin effect. This method of construction is unpopular for those who do not like pockmarks. Moreover, roller coating costs nearly 20% more material than brushing, artificially increasing the cost.
Brush painting is manual brushing and is a commonly used construction method. The advantage of the brush coating method is that it saves paint, the tool is simple, the construction is convenient, it is easy to grasp, the flexibility is strong and the adaptability to the paint variety is also strong, and it can be used for general paints.
However, the disadvantage of the brush coating method is that the manual operation is labor-intensive and inefficient, and it is not suitable for quick-drying paints. If the operation is unskilled and the action is not rapid, the paint film will produce brush marks, sag, and uneven brushing defects. .
Spraying is divided into two types, one is air spraying and the other is high pressure airless spraying.
Aerated spray leaves a lot of air bubbles on the wall. Although the construction speed is fast, the effect will be poor. It is not recommended for indoor use.
High-pressure airless spraying has just begun to become popular in China in recent years, but in foreign countries, high-pressure airless spraying of interior and exterior latex paints has long been widely used. The specific construction method is to use a special high-pressure airless sprayer to deliver the high-pressure paint through the high-pressure hose to the spray gun and release the pressure through the spray gun to form the atomization, thereby forming a smooth and dense coating on the wall surface.
Identification of construction quality tips
The simplest and most practical method is to use a flashlight to shine along the wall. Under strong flat rays, any cracks or bumps are visible at a glance.
buy:
Do not blindly pursue the performance of more products to buy a brand with a certain reputation, in order to prevent some unscrupulous construction units, "the civet cat for Prince Edward", the best consumers can think of the construction master asked after their own purchase. At present, there are many types of coatings in the paint market. There are also many kinds of business performance concepts. Consumers must pay attention to their own actual construction conditions to choose, and they should not blindly pursue performance-rich products.
Decoration paint 17 points to a good safety quality
1. Do not add water when using medium and dark latex paint, otherwise it is prone to color
2, plaster board joints to be bandages
3, where there is a gap in the wall to really cool cloth is better
4, the original putty some of the walls are best to get rid of, or brush again glue seal
5, try to buy a well-known brand of paint, decoration company recommended or foreman recommended try not to use
6, the weather is too wet, paint do not brush
7, paint, paint, etc. to be polished completely dry
8, the next paint must wait for the previous paint to dry
9, metal surface paint to do anti-rust treatment
10, the weather is too cold, the quality of paint construction will be poor
11. When the door is painted, use a textured paper to cover the hinge and door lock
12, too hot, pay attention to ventilation
13, when wallpapering, it is necessary to brush oil on the wall
14, when wallpapering, you should remove the switch and socket panel
15, light, mercerized latex paint to be completed once, make up for the color difference
16, after the skirting line is installed with putty and latex paint to make up the seam
17. Frosted glass should be protected with newspapers.
Paint Paints Buy Three Trees Paint Paint Lacquer Paint Interior Decoration Switch Decoration Find Decoration Company Okay Glass Door
Brass flange filter,Digital LCD Thermostat,electric regulating valve
Chongqing Xingjida Import and Export Trade Co., Ltd. , https://www.xjdvalve.com