One split type includes furnace purifier gas storage tank cooker, etc., a set of gasification furnace has many components and connecting pipes, and the weight is at least 100KG, which is inconvenient for manufacturing, transportation and installation.
Contrast: One machine 800mm high × 700mm wide × 400mm wide, only one ordinary cooktop size. Naturally, there are not as many connecting parts as the connecting parts, and the weight is at least reduced by half.
The cost of the two-part manufacturing is difficult to control. For example, a prototype of a factory in Beijing, the diameter of the furnace is 400mm × 1200mm high, the purifier 600mm long × 240mm wide × 630mm high, can calculate how many 2mm steel plate is needed? The furnace is connected to the purifier with two flanges, two flanges for the purifier and the fan, and eight welds for the welded pipe. There are two purifiers, and a gas storage tank is also needed in a factory in Guangxi.
Contrast: The integrated machine has reduced 4 flanges, minus the filter material to seal the door, and less than 8 welded pipe welds. It not only saves labor and materials, but also reduces the possibility of gas leakage and ensures more reliable operation.
The three-part appearance is awkward and rough, and the spray paint encounters high temperatures and burns to produce an unpleasant odor. The split type feed port has only one function. When the furnace temperature is too high, the burner fuel is not only wasted heat, but the flame from the furnace mouth is still a safety hazard.
Contrast: The surface area of ​​the one-piece machine is small and can be painted like the home appliance, beautiful and durable. The feed port is shared with the cooktop and can be placed in a pot or boiler when utilizing waste heat or semi-gasification.
The quadruple furnace has a large space and a large amount of feeding. Although the remaining fuel can be used to seal the fire, the same type of fire sealing method as the upper suction type not only generates a large amount of smoke, but also generates a large amount of tar due to the low temperature of the sealing fire. The original intention of lowering the tar to minimize tar is contrary.
Contrast: The one-machine furnace has a small space, but it is enough to use 2 hours for one feeding. The southern cooking shower can be replenished at any time without the need for a suction-type fire, but it is sealed at one time. The residual charcoal is good for the next gas to produce gas quickly. Automatic feeding and boiler fittings can be added during 24-hour heating in the north.
Fifth, the split type and the upper suction type can not work when there is a power outage or a fan failure during cooking, so the rice can not be cooked. 24 hours heating in the north, split-type fan running 24 hours a day, not only easy to burn the motor, but also increase the cost of electricity.
Contrast: The integrated machine adopts the composite design of the lower suction type and the semi-gasification furnace, and the electricity can be used without electricity. In addition to the use of gas when electricity is used, other times can be semi-gasification operation.
Concerned about surprises
Tag: Suction type Gasifier Feeding port Split type One machine
Previous: What is the working principle of the reciprocating vacuum pump? Next: Home improvement hardware accessories need to pay attention to three major issues
Led Smd Strip Light,Led Smart Strip Light,Led Flexible Strip Light,Rgb Led Smart Strip Light
Shenzhen Huangtai Photoelectric Co.,Ltd. , https://www.huangtailed.com