Assembled Roving for Centrifugal Casting Swjy

Assembled roving for centrifugal casting SWJY

Introduction

E-Glass Assembled Roving are compatible with polyester, vinyl ester and epoxy resins.

1) E-glass direct rovings:Direct roving for filament winding, Direct roving for pultrusion,
    Direct roving for weaving, Direct roving for LFT and etc.
2) E-glass assembled rovings:Assembled for sprayup, Assembled roving for filament winding,
   Assembled roving for SMC, Assembled roving for chopping, Assembled roving for centrifugal
   casting,Assembled  panel roving, Assembled roving for thermoplastics, Assembled roving for
   GMT and etc.

Technical data Product  feature

1.     Fiber linear density is stable, small deviations for tex.
2.     Less electrostatic accumulation, low fuzz.
3.     The fiber moderate stiffness, excellent dispensability.
4.     Good integrity with the concrete, good alkali resistance.

Application

Used to produce pipes of various diameters, storage tanks and tubes which are widely used in transportation, aerospace, military and electrical markets

Storage

Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively.
Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.

Package

Each spray up roving roll covering by shrinkage membrane or drawing membrane, then placed into cardboard box or set on pallet.Each pallet can stack 48 or 64 rolls .
each roll weight is 15~18kg.
It is can increasing roll weight according to customer requirements. Pallet stack shall no be higher than 2 layers, cardboard box shall no be higher than 5 layers

Guarantee
All of our products  are Super Quality Level,resonable price and timely delivery ! We can guarantee you will be satisfied with our products.
If the items  you received are not as our description or you are not satisfied with them, we will refund all the payment to you including shipping price.
we agree and accept to start with trials to get to know eachother, our super service will make you feel confident with us. Assembled roving for centrifugal casting SWJY

Introduction

E-Glass Assembled Roving are compatible with polyester, vinyl ester and epoxy resins.

1) E-glass direct rovings:Direct roving for filament winding, Direct roving for pultrusion,
    Direct roving for weaving, Direct roving for LFT and etc.
2) E-glass assembled rovings:Assembled for sprayup, Assembled roving for filament winding,
   Assembled roving for SMC, Assembled roving for chopping, Assembled roving for centrifugal
   casting,Assembled  panel roving, Assembled roving for thermoplastics, Assembled roving for
   GMT and etc.

Technical data Product  feature

1.     Fiber linear density is stable, small deviations for tex.
2.     Less electrostatic accumulation, low fuzz.
3.     The fiber moderate stiffness, excellent dispensability.
4.     Good integrity with the concrete, good alkali resistance.

Application

Used to produce pipes of various diameters, storage tanks and tubes which are widely used in transportation, aerospace, military and electrical markets

Storage

Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively.
Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.

Package

Each spray up roving roll covering by shrinkage membrane or drawing membrane, then placed into cardboard box or set on pallet.Each pallet can stack 48 or 64 rolls .
each roll weight is 15~18kg.
It is can increasing roll weight according to customer requirements. Pallet stack shall no be higher than 2 layers, cardboard box shall no be higher than 5 layers

Guarantee
All of our products  are Super Quality Level,resonable price and timely delivery ! We can guarantee you will be satisfied with our products.
If the items  you received are not as our description or you are not satisfied with them, we will refund all the payment to you including shipping price.
we agree and accept to start with trials to get to know eachother, our super service will make you feel confident with us.

Electromagnetic Flow Meter

Here you can find the related products in Electromagnetic Flow Meter, we are professional manufacturer of Electromagnetic Flow Meter,Magnetic Flow Meter,Electromagnetic Flow Sensor,Em Flow Meter. We focused on international export product development, production and sales. We have improved quality control processes of Electromagnetic Flow Meter to ensure each export qualified product.
If you want to know more about the products in Electromagnetic Flow Meter, please click the product details to view parameters, models, pictures, prices and other information about Electromagnetic Flow Meter,Magnetic Flow Meter,Electromagnetic Flow Sensor,Em Flow Meter.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Electromagnetic Flow Meter!

Electromagnetic Flow Meter,Magnetic Flow Meter,Electromagnetic Flow Sensor,Em Flow Meter

Xi'an Gavin Electronic Technology Co., Ltd , https://www.gaimcmea.com