Decoration reservation
The owner can book the cabinet before starting the renovation. First set the material, style, color, etc. of the cabinet, and discuss the design style with the designer. After the initial plan is passed, the cabinet can be set aside and the decoration can be concentrated.
How long does the cabinet have to wait from the time it is scheduled to be installed? There is a calculation formula: production cycle + logistics cycle + assembly time.
One thing to note is that the materials of the cabinets are different and the production cycle is different. The minimum period of the double veneer is 8~9 days, and the baking slab and solid wood board are about 28 days.
The logistics cycle should be divided according to domestic and imported. The domestic cabinets can be seen in one month, and the import may take three months. The actual logistics time will be affected by various factors such as weather and traffic.
The assembly time is not the most important. The skilled installer can install the cabinet in one day, and the raw hand will find a bunch of reasons for ten days and a half.
installation time
The installation time of the cabinet is after the hydropower transformation, the kitchen tile and the wall painting are all done, and the cabinet needs to be measured twice before installation.
The first measurement was made before the hydropower transformation, in order to design the specific functions and layout of the cabinet. At this time, you need to communicate with the designer about the initial idea of ​​the kitchen, such as the placement of electrical appliances in the kitchen, the type of range hood, etc., to facilitate the reservation of power outlets. In addition, a hydropower map is required to allow the constructor to arrange the traces in accordance with the water and electricity.
The second measurement is after the tile is finished, the purpose is to check the specific size of the cabinet. At this time, you need to tell the cabinet company that you have determined the model size of the installed appliances, range hoods, sinks, stoves, etc., in order to open the hole, as well as the cabinet's color, handle, basket and other trivial things to be determined again.
Cabinet material
Simply put, the cabinet materials are four types of solid wood panels, PVC panels, resin panels, and MDF. Each type is subdivided into several sub-categories.
The solid wood board has three kinds of pure solid wood board, solid wood composite board and solid wood veneer. In general, the price of solid wood boards is higher, the texture is better, but the waterproof and flameproof performance is poor.
The materials of PVC sheets and resin sheets are not naturally formed, and are processed to contain chemical substances. Waterproof and moisture proof performance is good, decorative effect is also good, but the surface is easy to scratch, and environmental performance is also to be discussed.
The surface of the MDF can be processed into different types of cabinet materials, such as crystal plates, refractory plates, melamine plates, and the like. Materials that are not well-processed are easily immersed in water and affect daily use. Author: Xusu Yun
Concerned about surprises
Label: cabinet customization, nourish installation time, pay attention to
Previous: Before the construction of the paint, we must do a good job of five points. Next: The color matching of the paint should adhere to the three principles.
Cylindrical Lens is used to correct astigmatism in the eye, and, in rangefinders, to produce astigmatism, stretching a point of light into a line.They are available in either Plano-Concave Cylinder Lens or plano-convex cylinderical lens configurations. Plano-Concave Cylindrical lens has a negative focal length and are used for image reduction or to spread light. Plano-Convex Cylinder lens has a positive focal length, which makes the cylindrical lens ideal for collecting and focusing light for many imaging applications. Every sizes,materials cylindrical lens are available according to your detailed parameters.
Some styles of cylindrical lens have antireflective coatings to increase the transmission of light through the cylindrical lens.
Fused silica cylindrical lens is ideal for demanding laser machining and medical applications.
Specification of our plano-concave cylinder lens or plano-convex cylinderical lens, meniscus cylinder lens as follow:
*Material: BK7,Ge,UV-grade fuse silica(JGS1,JGS2,JGS3)or other optical materials
*Dimension Tolerance: +0.0 -- -0.1mm
*Center Thickness: +/-0.1mm
*Focal Length Tolerance: +/-1%
*Surface Quality:20/10
*Surface Figure: lambda/2 at 633nm on plano side
*Clear Aperture>90%
*Chamfer: 0.25mm at 45 degree typical
*Coating Optional
Plano-Convex Cylindrical Lens,Plano Convex Cylindric Lens,Plano-Convex Cylinder Lens,Achromatic Cylindrical Lens
China Star Optics Technology Co.,Ltd. , https://www.csoptlens.com