Correct treatment of household decoration safety risks

In the post-decoration, try to use the principle of less and fine. Some people like to use a lot of decorative products, from large to small, generally not recommended. Many people like to wear large chandeliers in the living room, which is very luxurious. However, the current floor slabs are generally thinner and have fewer steel bars. They are not suitable for installing heavy chandeliers. In addition, the large murals are not safe. It is best not to hang large and heavy paintings on the back of the sofa and on the walls of the bedroom, because no matter how fixed it is, the material will age and be unsafe. There are still a lot of small decorations, although it will not cause great danger, but if it is placed too high, it will be easy to cause damage if it falls.

Indoor furnishings should also pay attention to, if you like a certain style of furniture, pay attention to who should be used for the first time, there are old people and children at home, it is best not to choose the furniture with prominent angles. In order to unify the style, you can look at the suitable furniture before design, and then the designer can design the room style according to the furniture.

Marble decoration

Hidden danger: marble material falls off the wall

Hidden causes: directly glued to the wall and glued, the glue is easy to age, causing the marble to fall off the wall.

Correct handling

There are three ways to handle marble walls:

One is dry hanging. First fix it on the wall with bolts. Then slot a stone, fix the stone with a T-shaped frame, and then fix the T-frame and the bolt together. This marble wall has a certain distance from the wall itself, but the fixing is good.

The second is wet stickers. First make a layer of steel mesh on the wall, then use concrete wet stickers.

The third is to paste directly. Generally divided into point paste and face stickers. The surface sticking method is suitable for thin stone, the thickness is below 8mm, the weight is similar to that of wall tiles, and it can be pasted with special mortar. Point paste is made of stone special glue, the range of points can not be greater than 25CM, the amount of points can not be less than 3-4CM, the thickness of glue is above 0.5CM, this way is used for slightly thicker stone.

Direct paste is also very important for wall requirements. First, if there is putty on the concrete wall, the putty must be shoveled off and directly attached to the concrete wall. In addition, because the deformation of the light-weight wall is large, if the wall is deformed after the glue, the marble will also change, causing hidden dangers.

The direct paste method is not suitable for the bathroom, because the bathroom is mostly light-weight wall, the deformation is large, and the bathroom is often wet. For a long time, the glue is easy to age and easy to accident.

fireplace

Hidden danger: the fireplace on the wall collapses or falls off

Hidden cause: If the place where the fireplace is connected to the wall is putty, the time is long and it is easy to age and powder, and it loses its effect, so the fireplace glued to the putty is easy to fall off.

When installing, if the ground is tilted outwards, it will collapse when it takes a long time. If the ground is high and the wall is low, the fireplace is tilted toward the wall and the chance of collapse is much smaller.

Correct handling

Because the decorative fireplace is heavy, the best way to connect the wall to the side panels is to use a pendant. It is also possible to use the side panels and the wall for special glue together with the stone, but the wall must be the original concrete wall, and the putty powder or the light wall on the wall cannot be directly bonded. For light wall fireplaces, it is best to connect the fireplace to the wall with bolts longer than 5 cm. The wall of the prefabricated panel or the hollow brick wall must be filled with the embedded parts such as wood to fix the space, and then the fireplace is fixed by bolts. If the wall cannot be filled with embedded parts, seal the board on the entire wall and then connect it with a pendant.

Wooden floor on the top of the wall

Easy to get hidden: falling off

Hidden cause: The board is not fixed on the surface with bolts and directly pasted.

Correct handling: On the top or on the wall, lay the keel and nail the wooden floor and keel together to increase the firmness.

Floor tile on the wall

Hidden danger: bricks fall off the wall

Hidden causes: the floor tiles are heavy and large, easy to sink when pasting, and the use of cement mortar itself is easy to slide, resulting in a high probability of emptying the tiles after the paving, resulting in deformation and shedding, and the climate change is also caused by the empty tiles. important reason. If the wall of the light body wall is easily deformed, the chance of empty bricks is higher.

Correct handling: If it is a concrete wall, it can be pasted, but the difficulty of pasting is increased, so it is best not to use floor tiles on the wall in the home.

Easy to develop hidden danger: shedding

Hidden causes: Only use quick-adhesive powder to stick the plaster decoration. Quickly stick powder + water + glue for a long time, easy to age, causing shedding.

Correct handling: Small plaster lines can be glued to the wall with quick-adhesive powder, but plaster lines and decorations larger than 15CM must be eye-opened on the wall, fastened with quick-adhesive powder, and then fixed with screws. Large plasters, such as European-style carved, are preferably fixed to the wall with metal pendants.

Sisal Wheel

Sisal Wheel,Sisal Buffing Wheel,Sisal Polishing Wheel,Stitched Sisal Buff

Jiangmen Gude Polishing Equipment Co., Ltd , https://www.kokipolishing.com