1, familiar with product performance
After obtaining the dome camera product, the engineering company and the user should be familiar with the technical parameters of the product, such as how much the input voltage is, how much power is there, and what functions, etc., so as to be as concise as possible.
2, check
Before installation, it is necessary to detect and adjust the dome camera so that the camera is in normal working condition.
3, installation method
Prior to construction, installation methods such as wall mounting or lifting can be used depending on the environment, safety, and aesthetics.
4, installation angle
The installation angle of the dome camera directly affects the scope of the monitoring image, so the installation needs to be more in accordance with the actual needs of the field. If installed at the entrance of the cell is less than 6 meters, the camera's angle is recommended to be 30 ° -60 °; if installed in the cash register, the camera's angle should be considered in the ± 15 ° -20 ° and so on. In short, the camera avoids the appearance of backlighting as much as possible, so that it can reach the customer's requirements as much as possible.
5, good video interface processing
The video signal output port, power input port, and control signal port of the dome camera are more important. Waterproof and anti-oxidation treatment should be done as much as possible during installation. In order to avoid instability, uncontrolled, or even display images in the future.
Generally, cameras need to work 24 hours a day. Therefore, to maintain the camera, you can extend the life of the camera and ensure the stability of the camera image. The following points should be noted.
·The stability of the camera voltage should be taken care of, otherwise it will affect the effect of the image and even cause the camera to be damaged;
• Always check the wire for damage, aging, and avoid abnormal conditions.
· Should avoid direct sunlight or strong light for a long time, so as not to cause camera ccd damage;
· It is necessary to frequently clean the dome camera, such as cleaning the dust on the surface of the camera shell, etc., and try not to open the shell. If it is necessary to open the dome camera, firstly disconnect the electricity;
· Create a camera profile for easy inspection and testing in the future.
Full Enclosed Measuring Tape,Fiberglass Tape Measuring Tape,Full Enclosed Fiberglass Measuring Tape
HENAN BONTHE MEASURING TOOLS. CO., LTD , https://www.btemeasuretool.com