There are some minor faults in the car, although it does not affect the use of the car, but it affects the mood of driving, sent to repair, and wasted money. Relying on the ground is not as good as relying on yourself. If you encounter problems, you know how to repair is the real craft. Here are some tips and solutions for cars that are common to you.
First, the fan belt breaks
The broken belt can be connected in series with the wire or the vehicle can be driven away by opening and stopping.
Second, the valve spring is broken
The broken spring can be removed, and the broken two pieces can be used in the past. If the spring is broken into several sections, the inlet and exhaust valve adjustment screws of the cylinder can be removed to keep the valve closed, and the cylinder is stagnant.
Third, the inlet and outlet hoses break
When the break is not big, the leaking area can be wrapped with a cloth coated with soap; if the break is large, the hose break can be cut off, a bamboo tube or iron pipe is placed in the middle, and the wire is tied tightly.
Fourth, the accumulation of the cup breaks
Use a rubber tube or a plastic tube to put the accumulation cup into and out of the oil pipe sleeve so that the oil does not pass through the accumulation cup.
Five, fuel tank damage
If the car is in use, it is found that the oil tank leaks oil, the oil spill can be cleaned, coated with soap or bubble gum in the oil spill, temporary infarction; repaired with epoxy resin adhesive, the car repair results are better.
Sixth, oil leakage
According to the size of the sand hole, the electric fuse for the corresponding specification can be selected, and the hammer can be slightly inserted into the sand hole to remove the oil leakage and water leakage.
Seven, oil pipe joint oil leakage
The cotton yarn can be wrapped around the lower edge of the horn, and the tubing nut and the oil pipe joint can be tightened; the bubble gum or maltose can be chewed into a paste and applied to the mouth of the tubing nut to be sealed after being dried.
Eight, tubing break
When the tubing breaks, wipe the cracks clean, apply soap, wrap it around the tubing with a cloth or tape, and tie it with wire, then apply a layer of soap.
Nine, the tubing is broken
When the tubing is broken, you can find a rubber or plastic pipe that fits the diameter of the tubing. If the socket is not tight enough, the ends are tied with wire to avoid oil leakage.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Vehicle Leveling Jack ,Motorhome Leveling Systems,Auto Leveling System,Travel Trailer Auto Leveling System
TIANHEMAST , https://www.robomasts.com