Geothermal tube scale

The long-term accumulation of scale in geothermal pipes can be divided into soft dirt layers: scales, slime, and microorganisms present in geothermal pipes. Because of the short deposition time, these forms of scale are soft and stick to the inner wall of geothermal pipes.
Mucosa: Close to the wall of the tube, between the soft dirt layer and the inner wall of the geothermal tube. The composition is mostly a combination of calcium, magnesium ions and metal ions. If the mucous layer is too long, the mucous layer of this layer will become hard dirt, clinging to the inner wall of the tube in a fragmented state.
Knowing the scale in the heating pipe is easier to clean.

Round Fixing Magnet, or Bushing Fixing Magnet, socket bushing magnet or Insert magnet  holder.The round fixing magnet, is a magnetic insert assembly mainly used for holding concrete formworks which made of steel,or holding tools. Its` magnetic force is range from 4 kg ~ 70kgs, which could hold steel structures steadily.

The Round fixing magnet, is made of Neodymium Magnet , steel armature and steel thread rod. The neodymium magnet is plated with NI-CU-NI treatment,the steel armature is treated with Zinc coating, the thread rod is coated with black epoxy. These surface treatment could offer good anti corrosion protections for the bushing fixing magnets.

The inserted  fixing magnet consists of cup magnet /base magnet and a separable thread rod. To make sure the adequate pull force,

The strongest permanent magnet-NdFeB magnets are used in the embeded socket fixing magnet. The NdFeb magnet are plated with NiCuNiand the metal cup could be plated with color Zinc or other treatments to well protect the metal cup from corrosion. The magnet contact surface should be clean and flat otherwise the actual magnetic force will be reduced. The max working temperature of the embeded fixing

magnets is 80 degrees. Please keep the embeded fixing magnets away fire or being heating. If higher working temperature is needed,  the

higher grade NdFeB magnets will be necessary then.The magnetic force and sizes could be designed according to customers' requirements.

Magnetic Bushing Assembly, bushing magnets, bush magnets or magnet bush assembly,are used for retaining tools, lights,signs, and other heavy objects. 


Bushing magnet, which configure by a thread hole cup magnet and a separable thread rod to fit the thread hole.Magnetic bushing magnet is made of a strong neodymium magnet,a steel cup and a thread rod. The magnet have been plated with thick coatings to prevent corrosion,please be noted that magnetic bushing assembly is not water proof,bushing magnet could not left in humid environment for months or years.Bushing magnet assembly have very strong magnetic force which could retaining heavy objects.We could produce various sizes of magnet bush assembly. Please kindly inform  the model number and quantity when send us inquiry,we could quote soon after calculate the costs.



inserted fixing magnet, a strong Magnetic Assembly for precast concrete industry, it is used to hold neodymium magnet


Inserted fixing magnet,also known as embeded fixing magnet, inserted socket fixing magnet, embeded socket fixing magnet, magnetic pipe ixing magnet,precast concrete fixing magnet.is the new magnetic assembly in precast concrete industry. It is the best solution to fix the

inserted socket in precast concrete panel.

Magnet



Magnetic Bushing Assembly

Insert Fixing Magnet,Round Fixing Magnet,Embeded Fixing Magnet,Bushing Fixing Magnet

NINGBO SHINE MAGENETIC TECHNOLOGY CO.,LTD , https://www.shinemagnets.com