Talking about seven kinds of clean aluminum alloy doors and windows

[China Aluminum Network] Nowadays, many families choose to use aluminum doors and windows in their renovations. Since aluminum is a special metal material, isn't it a bit weary to know when to scrub these aluminum doors and windows? Let's teach everyone how to clean aluminum doors and windows.

1. When cleaning aluminum doors and windows, do not step on the aluminum frame, and do not pull the frame for support. It is easy to wear out doors and windows or accidents on your own.

2. Aluminum doors and windows can be used soft cloth dipped in water or neutral detergent, do not use ordinary soap and detergent, but can not use detergent, toilet detergent and other strong acid and alkali cleaners, this will corrode the profile surface.

3. The seal tops and glass glue are the key structures to ensure the heat insulation of the aluminum doors and windows. If any, it must be repaired and replaced in time.

4. After the rainy weather, wipe the wet glass and door frames.

5. The connection parts of the door and window frame should be inspected frequently and the bolts should be tightened in time to replace the damaged parts. Positioning pins, wind braces, floor springs and other vulnerable parts of aluminum alloy doors and windows, should be checked from time to time, regularly add oil to keep clean and flexible.

6. Aluminum doors and windows in use, the action should be light, push and pull along the way; find it difficult to hard pull hard push, should be troubleshooting. Ash, deformation is the main reason for the difficulty of sliding aluminum alloy doors and windows, to keep the door frame clean, especially the push-pull tank cleaning. Vacuum cleaner can be used to suck the dust in the groove and door seal tops.

7. Always check the aluminum door and window frame wall joints, if ever loose aluminum doors and windows easily make the frame as a whole deformation, so that doors and windows can not be closed and sealed. Therefore, loosening of the screws at the joints should be fastened immediately, such as loosening of the screw footings, and application of epoxy glue to adjust a small amount of cement.

T8 UVC Lamp

Uvc Bulb,T8 Uvc Bulb,T8 Uvc Tube,T8 Uvc Light

Changxing leboom lighting product CO.Ltd. , https://www.leboomuvs.com