1. The suspended wooden keel must be painted with fireproof coating. The ceiling structure should be installed firmly and the keel should be straight and flat.
2. The joint of the ceiling cover panel should be left with a gap of 3-5 mm and a 45 degree bevel should be poured out.
3. The gypsum board is fixed by the countersunk head screw, and the top hat must be treated with anti-embroidery.
4. After the veneer enters the scene, the primer should be painted once to prevent pollution during construction.
5. The nail cap that requires steam nails or studs in woodworking construction should be slightly lower than the board surface.
6. The furniture frame plate should be slotted, and the white latex should be brushed at the cutting point. It is not allowed to directly connect with the nail.
7. All furniture backboards must be made of five PCT or thicker than five PCT.
8. The base layer of the door and window cover must use a nine-centimeter plate or a wood core plate. The groove plate should not be directly fixed on the wall.
9. The door is made of 12 PCT board. The door is made of double-layer wood core board. The 12 PCT slats or wood core slats should be opened with anti-deformation grooves. The blank should be coated with white latex level. 4-6 Fine processing after the day.
10, the color and pattern of the large upper decorative panel should be basically the same, the docking pattern should be smooth, when the length direction is docked, the joint position should avoid the line of sight of the line of sight, the seam is not obvious.
11. The gap between the doors of the same façade shall be horizontal and vertical, and the width and width shall be the same.
12. All exposed cuts should be closed and the lines should be straight and the surface should be flat.
13. Drawers, shuttle doors, cabinet doors, etc. should be opened and flexible, and the return position should be correct. The hardware installation should be neat and firm.
Wood Stove,Fireplace Wood Stove,Wood Stove Heater,Steel Fireplace Wood Stove
JINAN LODOR CNC EQUIPMENT CO.,LTD , https://www.zgfireplace.com